Great Dane

Standards: To perform the job successfully, an individual must be able to satisfactorily perform to the following Process, Quantity and Quality Standards:

• Employee must be able to perform and remember how to perform multiple tasks from day to day.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The employee must perform the assigned tasks in a manner in which they meet or exceed the required production level.
• The quantity of units, parts, assemblies and/or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Prior paint system experience preferred (dip or spray)
• Strong communication and leadership skillset

Education:

• High school diploma or GED equivalent
• Minimum of 3 years in manufacturing environment
• Ability to document written information accurately
• Good written and verbal communication
• Ability to communicate effectively in Englis

‍

• Stages completed painted material for shipping and assembles in appropriate dunnage.
• Monitors settings of paint, cleaning solution, and rinse tanks for specified temperatures and proper operation.
• Monitors conveyance controls for rate of movement.
• Supplies area with materials using an overhead crane, forklift, hand/powered carts or carrying materials by hand.
• Keeps equipment and work area clean and orderly.
• Observes all safety and security procedures.
• Manage multi-station paint operation, providing guidance and solutions to Paint operators.
• Perform routine testing of rinse system chemistry and paint viscosity
• Use problem-solving skills to troubleshoot defects or processing issues.
• Leads team in maintaining strong 5S culture
• Provides input for continuous improvement for safety, productivity, quality, and cost reduction.
• Ensure maintenance issues are escalated to the appropriate Supervisor.
• Ensure training matrices are maintained and updated or are appropriately escalated to appropriate Supervisor.
• Trains employees in new areas and reviews work completed for correctness.
• Randomly checks to ensure critical audits and/or Standard Work (if applicable) are being properly completed.
• Ensure BIQ boards are managed and completed.
• Before shift and end of shift activities are completed.
• Utilizes problem solving skills to solve problems identified during daily activities.
• Keeps management team abreast of significant issues or developments identified during daily activities and actions being taken to improve the situation.
• Ensure parts/materials are available and in required quantities.
• Performs other routine duties as necessary.

‍

• Ability to document written information accurately.
• Good written and verbal communication
• Ability to communicate effectively in English
• Ability to read welding drawings
• Minimum of 1 year manufacturing technician experience
• Proficiency in Excel, Word, and PowerPoint
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Complies with all safety and security procedures.
• Demonstrates “Safety First” behaviors, including awareness of surroundings, awareness of co-workers in the workspace, and behavior-based safety practices.
• Participates in problem solving team activities including defect cause analysis and prevention.
• Must be able to perform assigned work with minimal supervision (after completion of training period).
• Must be able to collaborate with production team members to meet production needs.
• Support the other Quality Team Members as needed.
• Maintain 5S standards within Quality Lab.
• Train Central Fabrication team members on use of Quality Lab equipment.
• Assist in creation of standard work processes.
• Perform other duties as required.
• Perform measurements on various production parts and equipment using common metrology equipment such as calipers, micrometers, height gages, etc.
• Prepare and analyze weld samples made from production processes.
• Create and distribute weld analysis reports.
• Provide feedback to manufacturing engineering team based on weld analysis results.
• Track and complete preventative maintenance on weld sample prep and analysis equipment.

• Education: GED or high school diploma is required.
• Training or education beyond GED or high school diploma is preferred.
• Experience: Previous experience working in a supervisory or management position in a production or similar setting is preferred.
• Knowledge of production techniques and procedures, safety rules and regulations, inspection criteria and methods and plant wide initiatives.
• Ability to effectively instruct, direct, supervise, and lead individuals and teams of people.
• Ability to read and interpret blueprints and other customer specifications.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Ensure compliance with all safety rules and requirements
• Manage and direct employees to ensure that the production, quality, and safety requirements are consistently met.
• Define staffing plan for the week and follows up on Lean Manufacturing activities.
• Perform safety observations, defines and reviews standard work together with ME department.
• Update team training matrices and keeps area clean and organized using 5S principles.
• Attend weekly safety meeting and communicating the topics discussed in those meetings to the employees in their group.

• Highschool diploma or GED equivalent
• Minimum of 3 years in manufacturing environment
• Experience in welding is a plus
• Ability to read welding and/or engineering blueprints
• Ability to document written information accurately
• Proficiency in Excel, Word, and PowerPoint
• Good written and verbal communication
• Ability to communicate effectively in English

• Complies with all safety and security procedures.
• Demonstrates “Safety First” behaviors, including awareness of surroundings, co-workers in the workspace, and behavior-based safety practices.
• Participates in problem solving team activities including defect cause analysis and prevention.
• Must be able to perform assigned work with minimal supervision (after completion of training period).
• Must be able to collaborate with production team members to meet production needs.
• Provide clear and accurate information to support daily shift pass-down reports and defect walk-back activities.
• Support continuous improvement or problem-solving activities related to Quality functions/responsibilities.
• Must perform the assigned tasks in accordance with the production move time.
• Execute process for non-conforming material areas.
• Update Built-In Quality (BIQ) Gate KPI board(s) and log appropriate data into RFGen.
• Participate in cross-functional team meetings to support needs of production operations.
• Perform root cause analysis for quality issues found during production and perform containment.
• Performs other duties as required.
• Must be willing and able to work overtime as needed to complete daily production requirements with little to no advanced notice.
• Assist in creation of standard work processes.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands.
• Aptitude to learn and retain new information.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• Ability to read a blueprints and manufacturing orders.

• Safely operate a forklift and/or crane to move material throughout the shop as needed.
• Review any material shortages with both supervision and purchasing to determine how needs will be met either through rescheduling or expediting material.
• Monitor inventory stock inventory levels of standard fab components and subassemblies that are identified and approved as repetitive, high demand, items.
• Must be able to review and contain scrap material per NCN process
• Must be able to support containment execute nonconforming/scrap process
• Able to use RF gen
• Learn JDE system
• Performs other routine duties as needed.

• Employee must be able to use pneumatic power tools and equipment of all types.
• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work in mechanically oriented situations following supervisor’s instruction.
• Aptitude to learn and retain new information.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.

• Must be able to visually identify and sort parts consistently per standard work.
• Supplies area with materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Keeps equipment and work area clean and orderly.
• Observes all safety and security procedures.
• Monitor inventory stock inventory levels of standard fab components and subassemblies that are identified and approved as repetitive, high demand, items.
• Must be able to review and contain scrap material per NCN process
• Must be able to support containment execute nonconforming/scrap process
• Able to use RF gen
• Learn JDE system
• Performs other routine duties as needed.
• Writes and reports findings on BIQ (Built-In-Quality) board.

• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Employee must perform the assigned tasks in a manner in which they meet or exceed the required production level.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• 3+ years of Robotic weld/fabrication experience.
• Welding Technology Certificate preferred.
• Strong communication and leadership skillset.
• Robot experience required. (Fanuc, Yaskawa, ABB, Kuka)
• Basic automated machine knowledge required. (Electrical Circuitry, Pneumatic Circuitry, Various I/O devices, Logic Instructions, and Mechanical Aptitude.)

• Ability to read blueprints / weld symbols, tape measure, and other measuring devices.
• Ability to set a welding machine, including the gas, volts, amps, and wire speed to weld in a variety of positions.
• Properly sets Automated Tooling according to work order/schedule.
• Loads raw materials, parts, etc., into the Automated Tooling. May include the use of an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Conducts initial daily startup on the machines, adjusting settings on controls, ensuring that the product meets specifications and quality standards based on blueprint, accurately confirming the dimensions and tolerances.
• Welder must inspect his/her product as instructed by standard operating procedures.
• Keeps equipment and work area clean and orderly.
• Adhere to all Safety requirements.
• Manage multiple weld machine operations, providing guidance and solutions to Robotic Weld Operators.
• Use advanced problem solving skills.

• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Employee must perform the assigned tasks in a manner in which they meet or exceed the required production level.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• CNC laser experience required. (Cincinnati, Mazaak, etc.)
• Basic automated machine knowledge required. (Electrical Circuitry, Pneumatic Circuitry, Various I/O devices, and Mechanical Aptitude.)

• Ability to read blueprints, tape measure, and other measuring devices.
• Properly set Automated Cincinnati Equipment according to work order/schedule.
• Loads raw materials, parts, etc. into the Automated Machinery. May include the use of an overhead crane, forklift, hand/powered carts or carrying materials by hand.
• Conducts initial startup on the machines, adjusting setting on controls, ensuring that the product meets specifications and quality standards based on blueprint, accurately confirming the dimensions and tolerances.
• Laser Operator must inspect his/her product as instructed by standard operating procedures.
• Keeps equipment and work area clean and orderly.
• Adhere to all Safety requirements.
• Performs other routine duties as needed.

• Must pass a fitness test to wear respirator protection.
• Ability to use power tools: Reading a tape measure and other measuring tools.
• Working with hands on mechanical tasks.
• Following instructions, given either verbally or in writing.
• Identifying and resolving problems in a timely manner.
• Lift up to 50 pounds.
• Squat/kneel, twist/turn, and stand/walk for majority of the day.
• Ability to work in a team-based environment safely.

A Fiberglass Laborer is responsible for spraying and chopping fiberglass, building small part products, grinding, and glasswork on the truck body sides and roofs. Also works on the production line and performs multiple tasks using a variety of hand-held tools and manufacturing equipment.

• Proper use of coating measuring equipment.
• Inspection of painted units for quality.
• Successfully prime and/or paint prepared surface to automotive level finish.
• Understand and be able to properly mix coatings and catalyst according to specifications.
• Understand proper chemical disposal.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small     fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports.

• 1 Year Welding Experience
• Prior manufacturing experience is a plus.
• Lift up to 50 pounds.
• Ability to work in a team-based environment safely.
• Detail oriented.
• Squat/kneel, twist/turn, and stand/walk for majority of the day.

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  

Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Use pneumatic power tools and equipment of all types.  
• Accurately read a tape measure.  
• Perform and remember how to perform multiple tasks from day to day.  
• Weld on a flat, curved or vertical surface.  
• Know how to:  

1. Set a welding machine, including the gas, volts, amps, and wire speed.  
2. Ability to weld in a variety of positions, particularly overhead.  
3. Be able to make minor adjustments to the welding equipment as needed.  

• File, grinds or scrapes sharp edges, burrs, scales or rust from work pieces.
• Properly load raw materials, parts, into the welding machine.
• Remove work piece and scrap from machines.
• Hammer out bent or warped spots in metal.
• Sort, mark, tag finished work.
• Transport material or signal crane operator to move materials.
• Compare work piece with straight edge or template to verify conformance to specifications.
• Clean work area, machines, tools and equipment.

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Employee must be able to use pneumatic power tools and equipment of all types.
• Employee must be able to accurately read a tape measure.
• Employee must be able to perform the physical requirements listed in that section of this job description.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The quantity of units, parts, assemblies and/ or installations that is expected will vary with the process being performed, customer specification, volume and location.
• Trailer Builder must inspect his/her product as instructed by standard operating procedures.

• Operates various handheld pneumatic and electric power tools and wrenches
• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Fill out paint usage reports

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work on mechanical tasks by following supervisors instruction.
• Ability to follow instructions, given either verbally or in writing.
• Ability to identify and resolve problems in a timely manner.
• Ability to communicate effectively in English.
• A favorable background screening, Drug Screening, and proof of work authorization in the United States is required for employment.

• Perform and remember how to perform multiple tasks from day to day.
• Follow standard operating procedures or supervisors instructions when doing tasks.
• Look for potential cost savings in the work process.
• Help keep scrap and waste to a minimum and be efficient in use of all supplies.
• Perform the manual tasks in a way they meet or exceed the required production level.
• Must inspect their product as instructed by standard operating procedures.